View source for Raw 005

<table>
<tr>
<td>Name:</td><td>RPL_ISUPPORT</td>
</tr>
<tr>
<td>Format:</td><td><source> 005 <target> :<list_of_features> :are supported by this server</td>
</tr>
<tr>
<td valign="top">Info:</td><td> 
This isreturned when connecting and when using the VERSION command<br />
for more info on 005 RPL_ISUPPORT numeric see:
<table><tr><td width="20"></td><td>
*http://www.irchelp.org/irchelp/misc/ccosmos.html#Heading474
*http://www.irc.org/tech_docs/draft-brocklesby-irc-isupport-03.txt
</td></tr></table>
features are:
<table><tr><td width="20"></td><td>
*a word describing the feature eg: 'SILENCE'
*a word describing the feature and an equals and a list of parameters. eg: SILENCE=15 (says that we support silence, and we support up to 15 of them per user)
*FOO=12,3 (says we support FOO with parameters 12 and 3)
</td></tr></table>

</td>
</tr>
<tr>
<td valign="top">Example:</td><td>
irc.quakenet.org 005 Dana WHOX WALLCHOPS WALLVOICES USERIP CPRIVMSG CNOTICE
SILENCE=15 MODES=6 MAXCHANNELS=20 MAXBANS=45 NICKLEN=15 TOPICLEN=250
AWAYLEN=160 KICKLEN=250 :are supported by this server
<br /><br />
irc.quakenet.org 005 Dana CHANTYPES=#& PREFIX=(ov)@+ CHANMODES=b,k,l,imnpstrDcCNu
CASEMAPPING=rfc1459 NETWORK=QuakeNet :are supported by this server
</td>
</tr>
<tr>
<td valign="top">Addition Information:</td><td>
<table>
<tr>
<td valign="top" width="30">
*WHOX
</td>
<td>
means extended WHO is supported, which refers to the parts after the '%' "WHO <mask1> [[<flags>][%[<fields>[,<query-type>]]] [:<mask2>]]"
</td>
</tr>
<tr>
<td>
*WALLCHOPS 
</td>
<td>
WALLCHOPS command is supported, it sends notice to all channel operators "WALLCHOPS <channel> :<message>" or "NOTICE @<channel> :<message>"
</td>
</tr>
<tr>
<td>
*WALLVOICES 
</td>
<td>
WALLVOICES command is supported, it sends a notice to all channel voices and operators "WALLVOICES <channel> :<message>"
</td>
</tr>
<tr>
<td>
*USERIP 
</td>
<td>
USERIP command is supported, same as the USERHOST command, only shows numeric ip instead of hostname "USERIP <nick> [<nick>]"
</td>
</tr>
<tr>
<td>
*CPRIVMSG 
</td>
<td>
CPRIVMSG command is supported, same as PRIVMSG only it bypasses the target flood limit, "CPRIVMSG <nick> <channel> :<message>"
</td>
</tr>
<tr>
<td>
*CNOTICE 
</td>
<td>
CNOTICE command is suppored, same as CPRIVMSG command, only it sends a notice "CNOTICE <nick> <channel> :<message>"
</td>
</tr>
<tr>
<td>
*SILENCE=15
</td>
<td>
SILENCE command supported and the silence list can hold a maximum of 15 entries "SILENCE [[+|-]<mask>|<nick>]"
</td>
</tr>
<tr>
<td>
*MODES=6
</td>
<td>
a maximum of 6 parameters can be used in the MODE command, example limit applies to type A, B and C modes with parameter, type D modes are unlimited, see chanmodes below "MODE <channel> +oooooo nick1 nick2 nick3 nick4 nick5 nick6"
</td>
</tr>
<tr>
<td>
*MAXCHANNELS=20
</td>
<td>
a user can join a maximum of 20 channels
</td>
</tr>
<tr>
<td>
*MAXBANS=45
</td>
<td>
maximum number of bans set on a channel is 45
</td>
</tr>
<tr>
<td>
*NICKLEN=15
</td>
<td>
nicknames can be at max 15 chars long
</td>
</tr>
<tr>
<td>
*TOPICLEN=250
</td>
<td>
topics can be at max 250 chars long, this also applies to quit messages
</td>
</tr>
<tr>
<td>
*AWAYLEN=160
</td>
<td>
away message can be at max 160 chars long
</td>
</tr>
<tr>
<td>
*KICKLEN=250
</td>
<td>
kick message can be at max 250 chars long
</td>
</tr>
<tr>
<td>
*CHANTYPES=#&
</td>
<td>
means #channels are supported and &channels (local channels)
</td>
</tr>
<tr>
<td>
*PREFIX=(ov)@+
</td>
<td>
means a user can have the @ and + prefix on a channel, which can be (un)set with o and v with the MODE command
</td>
</tr>
<tr>
<td valign="top">
*CHANMODES=b,k,l,imnpstrDcCNu
</td>
<td>
shows what channelmodes are supported and what type they are the list is formatted as A,B,C,D

*A type is a list mode an entry can be added with +<char> <param> an entry can removed with -<char> <param> the list can requested with +<char> an example is b (banlist) "MODE <channel> +b <banmask>" to ban "MODE <channel> -b <banmask>" to unban "MODE <channel> +b" to get the banlist

*B type is a mode which requires a parameter when setting and unsetting an example is +k (key) "MODE <channel> +k <key>" to set a key "MODE <channel> -k <key>" to unset a key

*C type is a mode which requires a parameter when setting but not for unsetting an example is +l (limit) "MODE <channel> +l <limit>" to set a limit "MODE <channel> -l" to unset the limit

*D type are modes without a parameter an example is +i (invite only) "MODE <channel> +i" to set invite only "MODE <channel> -i" to unset invite only
</td>
</tr>
<tr>
<td>
*CASEMAPPING=rfc1459
</td>
<td>
case mapping used for nick- and channel name comparing as specified in rfc1459 chars [a-z] are lowercase of [A-Z] and {}|~ the lowercase of []\^
</td>
</tr>
<tr>
<td>
*NETWORK=QuakeNet
</td>
<td>
name of the network the server is part of
</td>
</tr>

</table>
</td>
</tr>
</table>

[[Category:Raws]][[Category:Raw_version]]