View source for Scid

Changes the active connection for a script to connection id N, where N is a $cid value.
 /scid <-rsatM | N> [command]



'''Note''' that all commands after the /scid command will be performed on the new connection id.


Explanation of the switches (-a and -tM can only be used if you specify a command):
{| style="width:100%"
|-
| style="width:10%" | '''''Switch''''' || Style="width:90%" | '''''Meaning'''''
|-
| r      || resets the connection id to the original id for that script.
|-
| a     || performs the command on all connection ids.
|-
| tM      || limits the command to being performed only on servers with a certain connection status, where M is an or'd value of 1 = server connected, 2 = not connected, 4 = connecting, 8 = not connecting. The command is only performed if M matches the connect status of the connection id.
|-
| s      || makes any called commands or identifiers show their results.
|}




'''Note''' that if you use a command that contains $identifiers, and you want the identifiers to be evaluated in the target connection, you must pass them as $!identifier to prevent them from being evaluated first in the current connection.

== Example ==
 scid 1 [[echo]] -s My nick is $!me
This would echo your nick from the connection with the cid 1 in the status window of this connection .



 scid 1 echo -s My nick is $me
This example would echo the nick of the currently active connection in the status window of connection with the cid 1.



 scid -a echo -a This is $!network
This would echo all your networks in your active window. 


[[Category:Multi-server]]