Difference between revisions of "Rawdb"

Revision as of 15:20, 21 February 2011

 ¶001
 numeric: 001    RPL_WELCOME
 format: <source> 001 <target> :Welcome to the Internet Relay Network [via <provider>], <target>
 info: returned when connecing, [via <provider>] only appears when the PROVIDER F line has been set, it's used for providing promotional space to providers
 example: irc.quakenet.org 001 Dana :Welcome to the Internet Relay Network, Dana
 ¶002
 numeric: 002    RPL_YOURHOST
 format: <source> 002 <target> :Your host <server>, running version <version>
 info: returned when connecting
 example: irc.quakenet.org 002 Dana :Your host is irc.quakenet.org, running version u2.10.11.04+asuka(1.0.6a)
 ¶003
 numeric: 003    RPL_CREATED
 format: <source> 003 <target> :This server was created <DDD> <MMM> <D> <YYYY> at <HH:NN:SS> <TZ>
 info: returned when connecting
 example: irc.quakenet.org 003 Dana :This server was created Mon Mar 8 2004 at 19:10:49 CET
 ¶004
 numeric: 004    RPL_MYINFO
 format: <source> 004 <target> :<server> <version> <usermodes> <channelmodes> <channelmodes_with_param>
 info: returned when connecting
 example: irc.quakenet.org 004 Dana irc.quakenet.org u2.10.11.04+asuka(1.0.6a) dioswkgxXInR biklmnopstvrDcCNu bklov
 ¶005
 numeric: 005    RPL_ISUPPORT
 format: <source> 005 <target> :<list_of_features> :are supported by this server
 info: returned when connecting and when using the VERSION command
 info: features are either a word describing the feature eg: 'SILENCE', or a word describing the feature and an equals and a list of parameters. eg: SILENCE=15 (says that we support silence, and we support up to 15 of them per user), or FOO=12,3 (says we support FOO with parameters 12 and 3)
 example: irc.quakenet.org 005 Dana WHOX WALLCHOPS WALLVOICES USERIP CPRIVMSG CNOTICE SILENCE=15 MODES=6 MAXCHANNELS=20 MAXBANS=45 NICKLEN=15 TOPICLEN=250 AWAYLEN=160 KICKLEN=250 :are supported by this server
 example: irc.quakenet.org 005 Dana CHANTYPES=#& PREFIX=(ov)@+ CHANMODES=b,k,l,imnpstrDdcCNu CASEMAPPING=rfc1459 NETWORK=QuakeNet :are supported by this server
 ¶008
 numeric: 008    RPL_SNOMASK
 format: <source> 008 <target> <snomask> :: Server notice mask (<snomask_hex_value>)
 info: returned when requesting your usermodes with MODE and you have usermode +s set and when setting/changing snomask level
 info:  for more info on snomasks see http://cvs.undernet.org/viewcvs.py/*checkout*/undernet-ircu/ircu2.10/doc/snomask.html?rev=1.2
 example: irc.quakenet.org 008 Dana 32767 :: Server notice mask (0x7FFF)
 ¶015
 numeric: 015    RPL_MAP
 format: <source> 015 <target> :[<tree>][*|!]<server> (<X>s) [<N> clients]
 info: returned when using the MAP command. * means the server is bursting, ! means the server has acknowledged the burst, X seconds delay, N clients on the server
 example: irc.quakenet.org 015 Dana :irc.quakenet.org (0s) [20657 clients]
 example: irc.quakenet.org 015 Dana :|-!hub1.quakenet.org (0s) [2 clients]
 example: irc.quakenet.org 015 Dana :`-hub2.quakenet.org (0s) [3 clients]
 example: irc.quakenet.org 015 Dana :  `-*CServe.quakenet.org (0s) [1 clients]
 ¶016
 numeric: 016    RPL_MAPMORE
 format: <source> 016 <target> :`-----------------------------------------------------------<server> --> *more*
 info: returned when using the MAP command if the tree is too big in the output
 example: irc.quakenet.org 016 Dana :`-----------------------------------------------------------hub1.quakenet.org --> *more*
 ¶017
 numeric: 017    RPL_MAPEND
 format: <source> 017 <target> :End of /MAP
 info: returned when using the MAP command
 example: irc.quakenet.org 017 Dana :End of /MAP
 ¶105
 info: 100-199 Reserve numerics 000-099 for server-client connections where the client is local to the server.
 info: If any server passed a numeric in this range from another server then it is remapped to 100-199.
 info: 105 reply to remote VERSION request, see numeric 005
 ¶200
 numeric: 200    RPL_TRACELINK
 format: <source> 200 <target> Link <version> <mask> <server>
 info: returned when using the TRACE command, <server> is linked to the network
 example: irc.quakenet.org 200 Dana Link u2.10.11.04+asuka(1.0.6). CServe.* CServe.quakenet.org
 ¶201
 numeric: 201    RPL_TRACECONNECTING
 format: <source> 201 <target> Try. <class> <server>
 info: returned when using the TRACE command, <server> is connecting
 example: irc.quakenet.org 201 Dana Try. 90 hub1.quakenet.org
 ¶202
 numeric: 202    RPL_TRACEHANDSHAKE
 format: <source> 202 <target> H.S. <class> <server>
 info: returned when using the TRACE command, <server> is bursting?
 example: irc.quakenet.org 202 Dana H.S. 90 hub1.quakenet.org
 ¶203
 numeric: 203    RPL_TRACEUNKNOWN
 format: <source> 203 <target> ???? <class> <ip>
 info: returned when using the TRACE command, connection is unknown
 example: irc.quakenet.org 203 Dana ???? 1 127.0.0.1
 ¶204
 numeric: 204    RPL_TRACEOPERATOR
 format: <source> 204 <target> Oper <class> <nick>[@<ip>] <idle_time>
 info: returned when using the TRACE command, <nick> is an IRC Operator
 example: irc.quakenet.org 204 Dana Oper 10 Dana[@127.0.0.1] 4
 ¶205
 numeric: 205    RPL_TRACEUSER
 format: <source> 205 <target> User <class> <nick>[@<ip>] <idle_time>
 info: returned when using the TRACE command, <nick> is a user
 example: irc.quakenet.org 205 Dana User 1 Dana[@127.0.0.1] 5
 ¶206
 numeric: 206    RPL_TRACESERVER
 format: <source> 206 <target> Serv <class> <servers_linked>S <clients>C <connected_by> <nick>!<user>@<host|server> <idle_time> <connection_time>
 info: returned when using the TRACE command
 example: irc.quakenet.org 206 Dana Serv 90 2S 6C irc.quakenet.org *!*@hub1.quakenet.org 79 63706
 ¶208
 numeric: 208    RPL_TRACENEWTYPE
 format: <source> 208 <target> <newtype> 0 <nick>
 info: returned when using the TRACE command, connection does not fit in the other categories but is being displayed anyway
 example: irc.quakenet.org 208 Dana <newtype> 0 Dana
 ¶209
 numeric: 209    RPL_TRACECLASS
 format: <source> 209 <target> Class <class> <count>
 info: returned when using the TRACE command
 example: irc.quakenet.org 209 Dana Class 1 20657
 ¶211
 numeric: 211    RPL_STATSLINKINFO
 format: <source> 211 <target> <Connection> <SendQ> <SendM> <SendKBytes> <RcveM> <RcveKBytes> :<Open since>
 info: returned when using the STATS command, "STATS l" request
 example: irc.quakenet.org 211 Dana Connection SendQ SendM SendKBytes RcveM RcveKBytes :Open since
 example: irc.quakenet.org 211 Dana hub1.quakenet.org 0 1545 90 1536 93 :66729
 ¶212
 numeric: 212    RPL_STATSCOMMANDS
 format: <source> 212 <target> <command> <count> <byte_count>
 info: returned when using the STATS command, "STATS m" request
 example: irc.quakenet.org 212 Dana ACCOUNT 41 462
 ¶213
 numeric: 213    RPL_STATSCLINE
 format: <source> 213 <target> C <ip|host> <password> <server> <port> <class>
 info: returned when using the STATS command, "STATS C" request, some fields may be a '*'
 example: irc.quakenet.org 213 Dana C 127.0.0.1 * hub1.quakenet.org 4400 90
 ¶215
 numeric: 215    RPL_STATSILINE
 format: <source> 215 <target> I <IP_mask_or_crap_to_force_resolving> <password>|<limit> <hostmask> 0 <class>
 info: returned when using the STATS command, "STATS I" request, some fields may be a '*'
 example: irc.quakenet.org 215 Dana I *@* * *@* 0 1
 ¶216
 numeric: 216    RPL_STATSKLINE
 format: <source> 216 <target> [k|K] <host>|<ip>|$R<realname> "<reason>|!<file>" <user> 0 0
 info: returned when using the STATS command, "STATS K" request
 example: irc.quakenet.org 216 Dana K * "Do not IRC as root" *root 0 0
 ¶217
 numeric: 217    RPL_STATSPLINE
 format: <source> 217 <target> P <port> <connection_count> <C|S>[H] <active|disabled>
 info: returned when using the STATS command, "STATS P" request, C=client port, S=server port, H=hidden from users
 example: irc.quakenet.org 217 Dana P 6667 10435 C active
 ¶218
 numeric: 218    RPL_STATSYLINE
 format: <source> 218 <target> Y <class> <ping_frequency> <connect_frequency> <max_links> <max_sendQ> <links>
 info: returned when using the STATS command, "STATS Y" request
 example: irc.quakenet.org 218 Dana Y 1 90 0 25000 160000 20546
 ¶219
 numeric: 219    RPL_ENDOFSTATS
 format: <source> 219 <target> <char> :End of /STATS report
 info: returned when using the STATS command
 example: irc.quakenet.org 219 Dana Y :End of /STATS report
 ¶221
 numeric: 221    RPL_UMODEIS
 format: <source> 221 <target> +[<user_modes>]
 info: returned when requesting your usermodes with the MODE command
 example: irc.quakenet.org 221 Dana +ix
 ¶228
 numeric: 228    RPL_STATSQLINE
 format: <source> 228 <target> Q <channel> :<reason>
 info: returned when using the STATS command, "STATS Q" request
 info: Q:lines, Allows the admin to disallow the usage of /OPMODE and /CLEARMODE on certain sensitive channels.
 example: irc.quakenet.org 228 Dana #channel :They can take care of themselves
 ¶236
 numeric: 236    RPL_STATSVERBOSE
 format: <source> 236 <target> <Servername> <Uplink> <Flags> <Hops> <Numeric> <Lag> <RTT> <Up> <Down> <Clients/Max> <Proto> <LinkTS> :<info>
 info: returned when using the STATS command, "STATS v" request
 example: irc.quakenet.org 236 Dana Servername           Uplink             Flags Hops Numeric   Lag    RTT         Up Down       Clients/Max Proto LinkTS     :Info
 example: irc.quakenet.org 236 Dana irc.quakenet.org     hub1.quakenet.org  ----     1      AD     3    107190866    0    0    0        4 127 P10   1100716866 :hub server
 ¶237
 numeric: 237    RPL_STATSENGINE
 format: <source> 237 <target> <engine> :Event loop engine
 info: returned when using the STATS command, "STATS e" request
 example: irc.quakenet.org 237 Dana poll() :Event loop engine
 ¶238
 numeric: 238    RPL_STATSFLINE
 format: <source> 238 <target> F <option> <value>
 info: returned when using the STATS command, "STATS F" request
 example: irc.quakenet.org 238 Dana F HIDDEN_HOST users.quakenet.org
 ¶241
 numeric: 241    RPL_STATSLLINE
 format: <source> 241 <target> L <disallowed_hostmask> * <servermask> <max_depth> -1
 info: returned when using the STATS command, "STATS H" request
 example: irc.quakenet.org 241 Dana L 12.34.56.78 * hub1.quakenet.org 5 -1
 ¶242
 numeric: 242    RPL_STATSUPTIME
 format: <source> 242 <target> :Server Up <N> days, <HH:NN:SS>
 info: returned when using the STATS command, "STATS u" request
 example: irc.quakenet.org 242 Dana :Server Up 0 days, 0:28:56
 ¶243
 numeric: 243    RPL_STATSOLINE
 format: <source> 243 <target> [o|O] <mask> <password> <ID> 0 <class>
 info: returned when using the STATS command, "STATS O" request, O=global oper, o=local oper, some fields may be a '*'
 example: irc.quakenet.org 243 Dana O *@12.34.56.78 * Dana 0 10
 ¶244
 numeric: 244    RPL_STATSHLINE
 format: <source> 244 <target> H <allowed_hostmask> * <servername> <max_hops> -1
 info: returned when using the STATS command, "STATS h" request
 example: irc.quakenet.org 244 Dana H 12.34.56.78 * hub1.quakenet.org 0 -1
 ¶246
 numeric: 246    RPL_STATSTLINE
 format: <source> 246 <target> T <classnumber>|<hostmask> <file>
 info: returned when using the STATS command, "STATS T" request
 example: irc.quakenet.org 246 Dana T *.nl nl.motd
 ¶247
 numeric: 247    RPL_STATSGLINE
 format: <source> 247 <target> G <mask> <expire> :<reason>
 info: returned when using the STATS command, "STATS g" request
 example: irc.quakenet.org 247 Dana G *!*@12.34.56.78 1149164936 :clones
 ¶248
 numeric: 248    RPL_STATSULINE
 format: <source> 248 <target> U <server> <nicks> * 0 -1
 info: returned when using the STATS command, "STATS U" request
 example: irc.quakenet.org 248 Dana U CServe.quakenet.org Q * 0 -1
 ¶249
 numeric: 249    RPL_STATSDEBUG
 format: <source> 249 <target> :<text>
 info: returned when using the STATS command, "STATS z" request
 example: irc.quakenet.org 249 Dana :Clients 10(2080) Connections 4(3424)
 example: irc.quakenet.org 249 Dana :Users 7(1456) Accounts 2(32) Invites 0(0)
 ¶250
 numeric: 250    RPL_STATSCONN
 format: <source> 250 <target> :Highest connection count: <connection_count> (<client_count> clients)
 info: returned when using STATS command, "STATS w" request
 example: irc.quakenet.org 250 Dana :Highest connection count: 25001 (25000 clients)
 ¶251
 numeric: 251    RPL_LUSERCLIENT
 format: <source> 251 <target> :There are <visible_users> users and <invisible_users> invisible on <server_count> servers
 info: returned when using the LUSERS command
 example: irc.quakenet.org 251 Dana :There are 73276 users and 156690 invisible on 41 servers
 ¶252
 numeric: 252    RPL_LUSEROP
 format: <source> 252 <target> <oper_count> :operator(s) online
 info: returned when using the LUSERS command
 example: irc.quakenet.org 252 Dana 75 :operator(s) online
 ¶253
 numeric: 253    RPL_LUSERUNKNOWN
 format: <source> 253 <target> <count> :unknown connection(s)
 info: returned when using the LUSERS command
 example: irc.quakenet.org 253 Dana 233 :unknown connection(s)
 ¶254
 numeric: 254    RPL_LUSERCHANNELS
 format: <source> 254 <target> <channel_count> :channels formed
 info: returned when using the LUSERS command
 example: irc.quakenet.org 254 Dana 196336 :channels formed
 ¶255
 numeric: 255    RPL_LUSERME
 format: <source> 255 <target> :I have <client_count> clients and <servers_linked> servers
 info: returned when using the LUSERS command
 example: irc.quakenet.org 255 Dana :I have 15808 clients and 1 servers
 ¶256
 numeric: 256    RPL_ADMINME
 format: <source> 256 <target> :Administrative info about <server>
 info: returned when using the ADMIN command
 example: irc.quakenet.org 256 Dana :Administrative info about irc.quakenet.org
 ¶257
 numeric: 257    RPL_ADMINLOC1
 format: <source> 257 <target> :<text>
 info: returned when using the ADMIN command
 example: irc.quakenet.org 257 Dana :The QuakeNet IRC Network - www.quakenet.org
 ¶258
 numeric: 258    RPL_ADMINLOC2
 format: <source> 258 <target> :<text>
 info: returned when using the ADMIN command
 example: irc.quakenet.org 258 Dana :QuakeNet IRC Server
 ¶259
 numeric: 259    RPL_ADMINEMAIL
 format: <source> 259 <target> :<text>
 info: returned when using the ADMIN command
 example: irc.quakenet.org 259 Dana :IRC Admins <mail@host>
 ¶270
 numeric: 270    RPL_PRIVS
 format: <source> 270 <target> <nick> :<available>
 info: returned when using the PRIVS command
 example: irc.quakenet.org 270 Dana Dana :CHAN_LIMIT SHOW_INVIS SHOW_ALL_INVIS KILL LOCAL_KILL REHASH RESTART GLINE LOCAL_GLINE JUPE LOCAL_JUPE OPMODE LOCAL_OPMODE WHOX SEE_CHAN PROPAGATE DISPLAY SEE_OPERS FORCE_OPMODE FORCE_LOCAL_OPMODE
 ¶271
 numeric: 271    RPL_SILELIST
 format: <source> 271 <target> <nick> <mask>
 info: returned when using the SILENCE command
 example: irc.quakenet.org 271 Dana Dana *!*@evil.host.com
 ¶272
 numeric: 272    RPL_ENDOFSILELIST
 format: <source> 272 <target> <nick> :End of Silence List
 info: returned when using the SILENCE command
 example: irc.quakenet.org 272 Dana Dana :End of Silence List
 ¶275
 numeric: 275    RPL_STATSDLINE
 format: <source> 275 <target> [d|D] <servermask> <rule>
 info: returned when using the STATS command, "STATS d" request, D=server will refuse to connect to.., d=server will not autoconnect to..
 example: irc.quakenet.org 275 Dana d hub2.quakenet.org connected(hub1.quakenet.org)
 ¶280
 numeric: 280    RPL_GLIST
 format: <source> 280 <target> <mask> <expire_ts> <target> <+|-> :<reason>
 info: returned when using the GLINE command
 example: irc.quakenet.org 280 Dana *!root@* 1358009301 * + :don't irc as root
 ¶281
 numeric: 281    RPL_ENDOFGLIST
 format: <source> 281 <target> :End of G-line List
 info: returned when using the GLINE command
 example: irc.quakenet.org 281 Dana :End of G-line List
 ¶282
 numeric: 282    RPL_JUPELIST
 format: <source> 282 <target> <mask> <expire_ts> * <+|-> :<reason>
 info: returned when using the JUPE command
 example: irc.quakenet.org 282 Dana hud.de.quakenet.org 1107199864 * + :bad uplink
 ¶283
 numeric: 283    RPL_ENDOFJUPELIST
 format: <source> 283 <target> :End of Jupe List
 info: returned when using the JUPE command
 example: irc.quakenet.org 283 Dana :End of Jupe List
 ¶284
 numeric: 284    RPL_FEATURE
 format: <source> 284 <target> :<text>
 info: returned when using the GET command
 example: irc.quakenet.org 284 Dana :String value of HIDDEN_HOST: users.quakenet.org
 example: irc.quakenet.org 284 Dana :String value for PROVIDER not set
 ¶286
 numeric: 286     RPL_CHKHEAD
 format: <source> 286 <target> :Information for <user|host|channel|server> <nick>|<host>|<channel>|<server>
 info: returned when using the CHECK command
 example: irc.quakenet.org 286 Dana :Information for user Dana
 example: irc.quakenet.org 286 Dana :Information for host evil.host.com
 example: irc.quakenet.org 286 Dana :Information for channel #channel
 example: irc.quakenet.org 286 Dana :Information for server hub1.quakenet.org
 ¶287
 numeric: 287    RPL_CHANUSER
 format: <source> 287 <target> :  [<clone_count>] [@|+]<nick> (<user>@<host>)   (<account>) <realname>
 info: returned when using the CHECK command, "CHECK <channel>"
 example: irc.quakenet.org 287 Dana :     2 @Dana (Dana@127.0.0.1)   (Dana) Dana
 ¶290
 numeric: 290    RPL_DATASTR
 format: <source> 290 <target> :<text>
 info: returned when using the CHECK command
 example: irc.quakenet.org 290 Dana :No.   Nick             User        Host
 example irc.quakenet.org 290 Dana :1     Dana            Dana       evil.host.com
 ¶291
 numeric: 291    RPL_ENDOFCHECK
 format: <source> 291 <target> :[<text>]
 info: returned when using the CHECK command
 example: irc.quakenet.org 291 Dana :
 ¶301
 numeric: 301    RPL_AWAY
 format: <source> 301 <target> <nick> :<away message>
 info: returned when using the WHOIS or WHOWAS command on a user who is (was) marked as being away
 info: returned when sending a PRIVMSG, CPRIVMSG, CNOTICE or INVITE to a user who is marked as being away
 example: irc.quakenet.org 301 Dana Dana :away from keyboard
 ¶302
 numeric: 302    RPL_USERHOST
 format: <source> 302 <target> :<info>
 info: returned when using the USERHOST command
 info: <info> is a space seperated list of one or more of <nick>[*]=<+|-><user@host>, <nick> is the nick of the user, * means the user is an IRC Operator, + means the user is not marked as being away, - means the user is marked as being away, user@host is the part from nick!user@host
 example: irc.quakenet.org 302 Dana :Q*=+TheQBot@CServe.quakenet.org Dana=-Dana@Dana.users.quakenet.org
 ¶303
 numeric: 303    RPL_ISON
 format: <source> 303 <target> :<nick>
 info: returned when using the ISON command, <nick> is a space seperated list of one or more nicks
 example: irc.quakenet.org 303 Dana :Q Dana
 ¶304
 numeric: 304    RPL_TEXT
 format: <source> 304 <target> Type Spoofhost [Realhost Ident]
 info: returned for a "STATS S" request, [Realhost Ident] is only shown to IRC Operators
 example: irc.quakenet.org 304 Dana # Type Spoofhost Realhost Ident
 ¶305
 numeric: 305    RPL_UNAWAY
 format: <source> 305 <target> :You are no longer marked as being away
 info: returned when using the AWAY command without params
 example: irc.quakenet.org 305 Dana :You are no longer marked as being away
 ¶306
 numeric: 306    RPL_NOWAWAY
 format: <source> 306 <target> :You have been marked as being away
 info: returned when using the AWAY command with a message
 example: irc.quakenet.org 306 Dana :You have been marked as being away
 ¶311
 numeric: 311    RPL_WHOISUSER
 format: <source> 311 <target> <nick> <user> <host> * :<realname>
 info: returned when using the WHOIS command
 example: irc.quakenet.org 311 Dana Dana ~Dana Dana.users.quakenet.org * :Dana
 ¶312
 numeric: 312    RPL_WHOISSERVER
 format: <source> 312 <target> <nick> <server> :<server info>
 info: returned when using the WHOIS or WHOWAS command
 example: irc.quakenet.org 312 Dana Dana *.quakenet.org :QuakeNet IRC Server
 ¶313
 numeric: 313    RPL_WHOISOPERATOR
 format: <source> 313 <target> <nick> :is an IRC Operator
 info: returned when using the WHOIS command
 example: irc.quakenet.org 313 Dana Q :is an IRC Operator
 ¶314
 numeric: 314    RPL_WHOWASUSER
 format: <source> 314 <target> <nick> <user> <host> * :<realname>
 info: returned when using the WHOWAS command
 example: irc.quakenet.org 314 Dana Dana- Dana Dana.users.quakenet.org * :Dana
 ¶315
 numeric: 315    RPL_ENDOFWHO
 format: <source> 315 <target> <mask> :End of /WHO list.
 info: returned when using the WHO command
 example: irc.quakenet.org 315 Dana #channel :End of /WHO list.
 ¶317
 numeric: 317    RPL_WHOISIDLE
 format: <source> 317 <target> <nick> <idle_time> <signon_time> :seconds idle, signon time
 info: returned when using the WHOIS command
 example: irc.quakenet.org 317 Dana Dana 5 1084458353 :seconds idle, signon time
 ¶318
 numeric: 318    RPL_ENDOFWHOIS
 format: <source> 318 <target> <mask> :End of /WHOIS list.
 info: returned when using the WHOIS command
 example: irc.quakenet.org 318 Dana Dana :End of /WHOIS list.
 ¶319
 numeric: 319    RPL_WHOISCHANNELS
 format: <source> 319 <target> <nick> :<channels>
 info: returned when using the WHOIS command. <channels> is a space seperated list of one or more channels. channels are listed from newest to oldest as received by the server (joined by the user or bursted) in that order.
 info: each channel is formatted as [-][!][@|+|<]<channel>, where @ (+) means the user is opped (voiced) on the channel, < means the user is hidden on the channel (chanmode +D/+d), ! for zombie, if the user has set usermode +d (deafmode) a '-' appears in front of all channels
 example: irc.quakenet.org 319 Dana Dana :@#chan1 +#chan2 #chan3 <#chan4 !#chan5 !@#chan6
 example: irc.quakenet.org 319 Dana Dana :-@#chan1 -+#chan2 -#chan3 -<#chan4 -!#chan5 -!@#chan6
 ¶321
 numeric: 321    RPL_LISTSTART
 format: <source> 321 <target> Channel :Users  Name
 info: returned when using the LIST command
 example: irc.quakenet.org 321 Dana Channel :Users name
 ¶322
 numeric: 322    RPL_LIST
 format: <source> 322 <target> <channel> <user_count> :[<topic>]
 info: returned when using the LIST command
 example: irc.quakenet.org 322 Dana #channel 23 :welcome!
 ¶323
 numeric: 323    RPL_LISTEND
 format: <source> 323 <target> :End of /LIST
 info: returned when using the LIST command
 example: irc.quakenet.org 323 Dana :End of /LIST
 ¶324
 numeric: 324    RPL_CHANNELMODEIS
 format: <source> 324 <target> <channel> +[<modes>]
 info: returned when using the MODE command, "MODE <channel>"
 example: irc.quakenet.org 324 Dana #channel +tncCNul 30
 ¶329
 numeric: 329    RPL_CREATIONTIME
 format: <source> 329 <target> <channel> <time>
 info: returned when using the MODE command, "MODE <channel>"
 example: irc.quakenet.org 329 Dana #channel 1068641412
 ¶330
 numeric: 330    RPL_WHOISACCOUNT
 format: <source> 330 <target> <nick> <account> :is authed as
 info: returned when using the WHOIS command, on UnderNet "is logged in as" is shown as text
 example: irc.quakenet.org 330 Dana Dana Dana :is authed as
 ¶331
 numeric: 331    RPL_NOTOPIC
 format: <source> 331 <target> <channel> :No topic is set.
 info: returned when using the TOPIC command when no topic is set
 example: irc.quakenet.org 331 Dana #channel :No topic is set.
 ¶332
 numeric: 332    RPL_TOPIC
 format: <source> 332 <target> <channel> :<topic>
 info: returned when using the TOPIC command and when joining a channel (where a topic is set)
 example: irc.quakenet.org 332 Dana #channel :welcome!
 ¶333
 numeric: 333    RPL_TOPICWHOTIME
 format: <source> 333 <target> <channel> <nick> <time>
 info: returned when using the TOPIC command and when joining a channel (where a topic is set)
 example: irc.quakenet.org 333 Dana #channel Dana 1084528186
 ¶334
 numeric: 334    RPL_LISTUSAGE
 format: <source> 334 <target> :<info>, returned when using the LIST command "/QUOTE LIST :"
 example: irc.quakenet.org 334 Dana :Usage: /QUOTE LIST parameters
 example: irc.quakenet.org 334 Dana :Where parameters is a space or comma seperated list of one or more of:
 ¶338
 numeric: 338    RPL_WHOISACTUALLY
 format: <source> 338 <target> <nick> <user>@<host> <ip> :Actual user@host, Actual IP
 info: returned when using the WHOIS command
 example: irc.quakenet.org 338 Dana Dana Dana@evil.host.com 12.34.56.78 :Actual user@host, Actual IP
 ¶340
 numeric: 340    RPL_USERIP
 format: <source> 340 <target> :<info>
 info: returned when using the USERIP command, <info> is a space seperated list of one or more of <nick>[*]=<+|-><user@ip>
 info: <nick> is the nick of the user, * means the user is an IRC Operator, + means the user is not marked as being away, - means the user is marked as being away, user@ip is the part from nick!user@ip
 example: irc.quakenet.org 340 Dana :Q*=+TheQBot@127.0.0.1 Dana=-Dana@127.0.0.1
 ¶341
 numeric: 341    RPL_INVITING
 format: <source> 341 <target> <nick> <channel>
 info: returned when using the INVITE command, "INVITE <user> <channel>"
 example: irc.quakenet.org 341 Dana L #channel
 ¶346
 numeric: 346    RPL_INVITELIST
 format: <source> 346 <target> :<channel>
 info: returned when using the INVITE command, "INVITE"
 example: irc.quakenet.org 346 Dana :#channel
 ¶347
 numeric: 347    RPL_ENDOFINVITELIST
 format: <source> 347 <target> :End of Invite List
 info: returned when using the INVITE command, "INVITE"
 example: irc.quakenet.org 347 Dana :End of Invite List
 ¶351
 numeric: 351    RPL_VERSION
 format: <source> 351 <target> <version> <server> :<info>
 info: returned when using the VERSION command, <info> are the server options/info
 info: A=Assertion checks enabled B=The size of the bufferpool in mega bytes C=CMDLINE_CONFIG is defined, etc.
 example: irc.quakenet.org 351 Dana u2.10.11.04+asuka(1.0.6a). irc.quakenet.org :B96AeEFfIKMpSU
 ¶352
 numeric: 352    RPL_WHOREPLY
 format: <source> 352 <target> <channel> <user> <host> <server> <nick> <flags> :<distance> <realname>
 info: returned when using the WHO command
 example: irc.quakenet.org 352 Dana #channel Dana Dana.users.quakenet.org *.quakenet.org Dana G+x :0 Dana
 ¶353
 numeric: 353    RPL_NAMREPLY
 format: <source> 353 <target> <=|*|@> <channel> :<names>
 info: returned when using the NAMES command and when joining a channel
 info: <=|*|@>, if neither chanmode +p nor +s is set, a = is returned, if chanmode +p is set, a * is returned, if chanmode +s is set, a @ is returned
 example: irc.quakenet.org 353 Dana = #channel :@L Dana +fiDanaot
 ¶354
 numeric: 354    RPL_WHOSPCRPL
 format: <source> 354 <target> [<querytype>] [<channel>] [<user>] [<ip>] [<host>] [<server>] [<nick>] [<flags>] [<distance>] [<idle_time>] [<account>] [:<realname>]
 info: returned when using the WHO command
 example: irc.quakenet.org 354 Dana 544 #channel Dana 127.0.0.1 Dana.users.quakenet.org *.quakenet.org Dana G+x 3 0 Dana :Dana
 ¶355
 numeric: 355    RPL_DELNAMREPLY
 format: <source> 355 <target> <=|*|@> <channel> :<names>
 info: returned when using the NAMES command, "NAMES -d <channel>"
 info: <=|*|@>, if neither chanmode +p nor +s is set, a = is returned, if chanmode +p is set, a * is returned, if chanmode +s is set, a @ is returned
 example: irc.quakenet.org 355 Dana = #channel :fiDanaot
 ¶362
 numeric: 362    RPL_CLOSING
 format: <source> 362 <target> <nick> :Operator enforced Close
 info: returned when using the CLOSE command
 example: irc.quakenet.org 362 Dana Dana :Operator enforced Close
 ¶363
 numeric: 363    RPL_CLOSEEND
 format: <source> 363 <target> <N> :Connections Closed
 info: returned when using the CLOSE command
 example: irc.quakenet.org 363 Dana 2 :Connections Closed
 ¶364
 numeric: 364    RPL_LINKS
 format: <source> 364 <target> <server1> <server2> :<distance> <description_server1>
 info: returned when using the LINKS command, <server1> connected to <server2>, and <distance> servers between you and <server1>
 example: irc.quakenet.org 364 Dana CServe.quakenet.org irc.quakenet.org :2 The Q Bot
 ¶365
 numeric: 365    RPL_ENDOFLINKS
 format: <source> 365 <target> <mask> :End of /LINKS list.
 info: returned when using the LINKS command
 example: irc.quakenet.org 365 Dana * :End of /LINKS list.
 ¶366
 numeric: 366    RPL_ENDOFNAMES
 format: <source> 366 <target> <channel> :End of /NAMES list.
 info: returned when using the NAMES command and by joining a channel
 example: irc.quakenet.org 366 Dana #channel :End of /NAMES list.
 ¶367
 numeric: 367    RPL_BANLIST
 format: <source> 367 <target> <channel> <banmask> <nick> <time>
 info: returned when using the MODE command, "MODE <channel> +b"
 example: irc.quakenet.org 367 Dana #channel *!*@12.34.56.78 Dana 1083834723
 ¶368
 numeric: 368    RPL_ENDOFBANLIST
 format: <source> 368 <target> <channel> :End of Channel Ban List
 info: returned when using the MODE command, "MODE <channel> +b"
 example: irc.quakenet.org 368 Dana #channel :End of Channel Ban List
 ¶369
 numeric: 369    RPL_ENDOFWHOWAS
 format: <source> 369 <target> <mask> :End of WHOWAS
 info: returned when using the WHOWAS command
 example: irc.quakenet.org 369 Dana Q :End of WHOWAS
 ¶371
 numeric: 371    RPL_INFO
 format: <source> 371 <target> :<text>
 info: returned when using the INFO command
 example: irc.quakenet.org 371 Dana :IRC --
 example: irc.quakenet.org 371 Dana :This program is free software; see LICENSE in the distribution
 ¶372
 numeric: 372    RPL_MOTD
 format: <source> 372 <target> :- <text>
 info: returned when using the MOTD command and when connecting
 example: irc.quakenet.org 372 Dana :- ...      This server accepts connections on the following ports:      ...
 ¶374
 numeric: 374    RPL_ENDOFINFO
 format: <source> 374 <target> :End of /INFO list.
 info: returned when using the INFO command
 example: irc.quakenet.org 374 Dana :End of /INFO list.
 ¶375
 numeric: 375    RPL_MOTDSTART
 format: <source> 375 <target> :- <server> Message of the Day -
 info: returned when using the MOTD command and when connecting
 example: irc.quakenet.org 375 Dana :- irc.quakenet.org Message of the Day -
 ¶376
 numeric: 376    RPL_ENDOFMOTD
 format: <source> 376 <target> :End of /MOTD command.
 info: returned when using the MOTD command and when connecting (if the motd is send)
 example: irc.quakenet.org 376 Dana :End of /MOTD command.
 ¶381
 numeric: 381    RPL_YOUREOPER
 format: <source> 381 <target> :You are now an IRC Operator
 info: returned when using the OPER command to log in as IRC Operator
 example: irc.quakenet.org 381 Dana :You are now an IRC Operator
 ¶382
 numeric: 382    RPL_REHASHING
 format: <source> 382 <target> [<file>] :[Rehashing|Reopening log files|Flushing MOTD cache]
 info: returned when using the REHASH command, "REHASH", "REHASH l", "REHASH m"
 example: irc.quakenet.org 382 Dana ircd.conf :Rehashing
 ¶391
 numeric: 391    RPL_TIME
 format: <source> 391 <target> <server> <timestamp> <offset> :<DAY> <MMM> <DD> <YYYY> -- <HH:NN> [+|-]<HH:NN>
 info: returned when using the TIME command
 example: irc.quakenet.org 391 Dana irc.quakenet.org 1084533226 -338 :Friday May 14 2004 -- 13:19 +02:00
 ¶396
 numeric: 396    RPL_HOSTHIDDEN
 format: <source> 396 <target> [<user>@]<host> :is now your hidden host
 info: returned when: having set usermode +x and are logged in with the network; using the sethost command (setting usermode +h); unsetting usermode +h
 example: irc.quakenet.org 396 Dana Dana.users.quakenet.org :is now your hidden host
 ¶398
 numeric: 398    RPL_STATSSLINE
 format: <source> 398 <target> <number> <oper|user> <spoofed_host> [<mask> <user>]
 info: returned when using the STATS command, "STATS S", only IRC Operators can see <mask> <user> and S:lines for oper
 example: irc.quakenet.org 398 Dana 1 oper evil.host.com 12.34.56.78 foo
 ¶399
 numeric: 399    RPL_USINGSLINE
 format: <source> 399 <target> :Using S-line privilege
 info: returned when an S line is auto-applied when you connect
 example: irc.quakenet.org 399 Dana :Using S-line privilege
 ¶401
 numeric: 401    ERR_NOSUCHNICK
 format: <source> 401 <target> <nick> :No such nick
 format: <source> 401 <target> <nick> :Target left <network>. Failed to deliever: [<first_20_chars_of_message>]
 info: returned when a nick does not exist or leaves the network before the message is delivered
 example: irc.quakenet.org 401 Dana Q :No such nick
 example: irc.quakenet.org 401 Dana * :Target left QuakeNet. Failed to deliver: [cows go moo!]
 ¶402
 numeric: 402    ERR_NOSUCHSERVER
 format: <source> 402 <target> <server> :No such server
 info: returned when a server does not exist
 example: irc.quakenet.org 402 Dana hub1.quakenet.org :No such server
 ¶403
 numeric: 403    ERR_NOSUCHCHANNEL
 format: <source> 403 <target> <channel> :No such channel
 info: returned when a channel does not exist
 example: irc.quakenet.org 403 Dana #channel :No such channel
 ¶404
 numeric: 404    ERR_CANNOTSENDTOCHAN
 format: <source> 404 <target> <channel> :Cannot send to channel
 info: returned when a message to a channel is blocked by a channel mode or ban
 example: irc.quakenet.org 404 Dana #channel :Cannot send to channel
 ¶405
 numeric: 405    ERR_TOOMANYCHANNELS
 format: <source> 405 <target> <channel> :You have joined too many channels
 info: returned when trying to join more channels than is allowed
 example: irc.quakenet.org 405 Dana #channel :You have joined too many channels
 ¶406
 numeric: 406    ERR_WASNOSUCHNICK
 format: <source> 406 <target> <nick> :There was no such nickname
 info: returned when using WHOWAS command and there was no such nick
 example: irc.quakenet.org 406 Dana Q :There was no such nickname
 ¶408
 numeric: 408    ERR_SEARCHNOMATCH
 format: <source> 408 <target> :<command> <mask> No matching record(s) found
 info: returned when using a command such as CHECK and no match is found
 example: irc.quakenet.org 408 Dana :CHECK *.de No matching record(s) found
 ¶409
 numeric: 409    ERR_NOORIGIN
 format: <source> 409 <target> :No origin specified
 info: returned when using the PING and PONG commands without the originator parameter
 example: irc.quakenet.org 409 Dana :No origin specified
 ¶411
 numeric: 411    ERR_NORECIPIENT
 format: <source> 411 <target> :No recipient given (<command>)
 info: returned when no target is specified for the command, such as PRIVMSG and NOTICE
 example: irc.quakenet.org 411 Dana :No recipient given (PRIVMSG)
 ¶412
 numeric: 412   ERR_NOTEXTTOSEND
 format: <source> 412 <target> :No text to send
 info: returned when using PRIVMSG or NOTICE without text to send
 example: irc.quakenet.org 412 Dana :No text to send
 ¶413
 numeric: 413    ERR_NOTOPLEVEL
 format: <source> 413 <target> <mask> :No toplevel domain specified
 info: returned when using $<mask> as target (broadcast) in PRIVMSG or NOTICE commands
 example: irc.quakenet.org 413 Dana $* :No toplevel domain specified
 ¶414
 numeric: 414    ERR_WILDTOPLEVEL
 format: <source> 414 <target> <mask> :Wildcard in toplevel Domain
 info: returned when a wildcard is in the toplevel domain in <mask>
 example: irc.quakenet.org 414 Dana $*.de* :Wildcard in toplevel Domain
 ¶416
 numeric: 416    ERR_QUERYTOOLONG
 format: <source> 416 <target> <command> :Too many lines in the output, restrict your query
 info: returned when a request returns too many results, for example using "WHO *" or "WHOIS *"
 example: irc.quakenet.org 416 Dana WHO :Too many lines in the output, restrict your query
 ¶421
 numeric: 421    ERR_UNKNOWNCOMMAND
 format: <source> 421 <target> <command> :Unknown command
 info: returned when using an unknown command
 example: irc.quakenet.org 421 Dana cow :Unknown command
 ¶422
 numeric: 422    ERR_NOMOTD
 format: <source> 422 <target> :MOTD File is missing
 info: returned when using the MOTD command or when connecting and the MOTD file is missing
 example: irc.quakenet.org 422 Dana :MOTD File is missing
 ¶423
 numeric: 423    ERR_NOADMININFO
 format: <source> 423 <target> <server> :No administrative info available
 info: returned when using the ADMIN command and no info is available
 example: irc.quakenet.org 423 Dana irc.quakenet.org :No administrative info available
 ¶431
 numeric: 431    ERR_NONICKNAMEGIVEN
 format: <source> 431 <target> :No nickname given
 info: returned when using a command which requires a nick parameter such as WHOIS and none is given
 example: irc.quakenet.org 431 Dana :No nickname given
 ¶432
 numeric: 432    ERR_ERRONEUSNICKNAME
 format: <source> 432 <target> <nick> :Erroneous Nickname
 info: returned when trying to change nick to an erroneous nickname (either invalid or G-lined)
 example: irc.quakenet.org 432 Dana -Dana :Erroneus nickname
 ¶433
 numeric: 433    ERR_NICKNAMEINUSE
 format: <source> 433 <target> <nick> :Nickname is already in use.
 info: returned when trying to change nick which is already used
 example: irc.quakenet.org 433 Dana Q :Nickname is already in use.
 ¶436
 numeric: 436    ERR_NICKCOLLISION
 format: <source> 436 <target> <nick> :Nickname collision KILL
 info: returned when a nickname collision occurs on your nick, and you are disconnected right after
 example: irc.quakenet.org 436 Dana Dana :Nickname collision KILL
 ¶437
 numeric: 437    ERR_BANNICKCHANGE
 format: <source> 437 <target> <channel> :Cannot change nickname while banned on channel
 info: returned when changing nick and you are banned on a channel
 example: irc.quakenet.org 437 Dana #channel :Cannot change nickname while banned on channel
 ¶438
 numeric: 438    ERR_NICKTOOFAST
 format: <source> 438 <target> <nick> :Nick change too fast. Please wait <seconds> seconds.
 info: returned when changing nick too fast
 example: irc.quakenet.org 438 Dana Dana- :Nick change too fast. Please wait 29 seconds.
 ¶439
 numeric: 439    ERR_TARGETTOOFAST
 format: <source> 439 <target> <new_target> :Target change too fast. Please wait <N> seconds.
 info: returned when changing target and you have no free targets left
 example: irc.quakenet.org 439 Dana #channel :Target change too fast. Please wait 30 seconds.
 ¶441
 numeric: 441    ERR_USERNOTINCHANNEL
 format: <source> 441 <target> <nick> <channel> :They aren't on that channel
 info: returned when trying to kick/op/voice/deop/devoice someone who is not on the channel
 example: irc.quakenet.org 441 Dana fiDanaot #channel :They aren't on that channel
 ¶442
 numeric: 442    ERR_NOTONCHANNEL
 format: <source> 442 <target> <channel> :You're not on that channel
 info: returned when trying to do something on a channel you are not on, such as changing channel modes
 example: irc.quakenet.org 442 Dana #channel :You're not on that channel
 ¶443
 numeric: 443    ERR_USERONCHANNEL
 format: <source> 443 <target> <nick> <channel> :is already on channel
 info: returned when trying to invite a user who is already on the channel
 example: irc.quakenet.org 443 Dana fiDanaot #channel :is already on channel
 ¶451
 numeric: 451    ERR_NOTREGISTERED
 format: <source> 451 <target> [<target>] :Register first.
 info: returned when sending commands before the client is registered
 example: irc.quakenet.org 451 *  :Register first.
 example: irc.quakenet.org 451 Dana Dana :Register first.
 ¶461
 numeric: 461    ERR_NEEDMOREPARAMS
 format: <source> 461 <target> <command> [<param>] :Not enough parameters
 info: returned when not enough parameters are specified
 example: irc.quakenet.org 461 Dana JOIN :Not enough parameters
 example: irc.quakenet.org 461 Dana MODE +k :Not enough parameters
 ¶462
 numeric: 462    ERR_ALREADYREGISTRED
 format: <source> 462 <target> :You may not reregister
 info: returned when using USER or SERVER command after being registered
 example: irc.quakenet.org 462 Dana :You may not reregister
 ¶464
 numeric: 464    ERR_PASSWDMISMATCH
 format: <source> 464 <target> :Password Incorrect
 info: returned when trying to OPER with the wrong password and when connecting with the wrong password
 example: irc.quakenet.org 464 Dana :Password incorrect
 ¶465
 numeric: 465    ERR_YOUREBANNEDCREEP
 format: <source> 465 <target> :<reason>
 info: returned before the connection is closed when you are G-lined or K-lined
 example: irc.quakenet.org 465 Dana :Connection from your host is refused on this server.
 ¶467
 numeric: 467    ERR_KEYSET
 format: <source> 467 <target> <channel> :Channel key already set
 info: returned when setting a channel key when one is already set and when unsetting a channel key when none is set
 example: irc.quakenet.org 467 Dana #channel :Channel key already set
 ¶468
 numeric: 468    ERR_INVALIDUSERNAME
 format: <source> 468 <target> :info
 info: returned when trying to connect with an invalid username
 example: irc.quakenet.org 468 Dana :Your username is invalid.
 ¶471
 numeric: 471    ERR_CHANNELISFULL
 format: <source> 471 <target> <channel> :Cannot join channel, channel is full (+l)
 info: returned when trying to join a channel which is full
 example: irc.quakenet.org 471 Dana #channel :Cannot join channel, channel is full (+l)
 ¶472
 numeric: 472    ERR_UNKNOWNMODE
 format: <source> 472 <target> <char> :is unknown mode char to me
 info: returned when trying to set an unknown channel mode
 example: irc.quakenet.org 472 Dana A :is unknown mode char to me
 ¶473
 numeric: 473    ERR_INVITEONLYCHAN
 format: <source> 473 <target> <channel> :Cannot join channel, you must be invited (+i)
 info: returned when trying to join an invite only channel (when not invited)
 example: irc.quakenet.org 473 Dana #channel :Cannot join channel, you must be invited (+i)
 ¶474
 numeric: 474    ERR_BANNEDFROMCHAN
 format: <source> 474 <target> <channel> :Cannot join channel, you are banned (+b)
 info: returned when trying to join a channel when you are banned
 example: irc.quakenet.org 474 Dana #channel :Cannot join channel, you are banned (+b)
 ¶475
 numeric: 475    ERR_BADCHANNELKEY
 format: <source> 475 <target> <channel> :Cannot join channel, you need the correct key (+k)
 info: returned when trying to join a +k channel without the correct key
 example: irc.quakenet.org 475 Dana #channel :Cannot join channel, you need the correct key (+k)
 ¶477
 numeric: 477    ERR_NEEDREGGEDNICK
 format: <source> 477 <target> <channel> :Cannot join channel, you must be authed to join (+r)
 info: returned when trying to join a channel where chanmode +r is set and you are not registered
 example: irc.quakenet.org 477 Dana #channel :Cannot join channel, you must be authed to join (+r)
 ¶478
 numeric: 478    ERR_BANLISTFULL
 format: <source> 478 <target> <channel> <mask> :Channel ban/ignore list is full
 info: returned when trying to set a ban when the banlist is full
 example: irc.quakenet.org 478 Dana #channel *!*@evil.host.com :Channel ban/ignore list is full
 ¶479
 numeric: 479    ERR_BADCHANNAME
 format: <source> 479 <target> <channel> :Cannot join channel (G-lined: <reason>)
 info: returned when trying to join a channel which is G-lined
 example: irc.quakenet.org 479 Dana #channel :Cannot join channel (G-lined: network misuse)
 ¶481
 numeric: 481    ERR_NOPRIVILEGES
 format: <source> 481 <target> :Permission Denied: Insufficient privileges
 info: returned when you have insufficient privileges to use the command
 example: irc.quakenet.org 481 Dana :Permission Denied: Insufficient privileges
 ¶482
 numeric: 482    ERR_CHANOPRIVSNEEDED
 format: <source> 482 <target> <channel> :You're not channel operator
 info: returned when trying to use a command which requires you to be a channel operator
 example: irc.quakenet.org 482 Dana #channel :You're not channel operator
 ¶483
 numeric: 483    ERR_CANTKILLSERVER
 format: <source> 483 <target> :You cant kill a server!
 info: returned when trying to use KILL on a server
 example: irc.quakenet.org 483 Dana :You cant kill a server!
 ¶484
 numeric: 484    ERR_ISCHANSERVICE
 format: <source> 484 <target> <nick> <channel> :Cannot kill, kick or deop an IRC operator
 format: <source> 484 <target> KILL <nick> :Cannot kill, kick or deop an IRC operator
 info: returned when trying to kill, kick or deop an IRC Operator with usermode +k set
 example irc.quakenet.org 484 Dana Dana #channel :Cannot kill, kick or deop an IRC operator
 example: irc.quakenet.org 484 Dana KILL Dana :Cannot kill, kick or deop an IRC operator
 ¶485
 numeric: 485    ERR_ISREALSERVICE
 format: <source> 485 <target> <nick> <channel> :Cannot kill, kick or deop a network service
 format: <source> 485 <target> KILL <nick> :Cannot kill, kick or deop a network service
 info: returned when trying to kill, kick or deop a network service
 example: irc.quakenet.org 485 Dana Q #channel :Cannot kill, kick or deop a network service
 example: irc.quakenet.org 485 Dana KILL Q :Cannot kill, kick or deop a network service
 ¶486
 numeric: 486    ERR_ACCOUNTONLY
 format: <source> 486 <target> <nick> :You must be authed in order to message this user
 info: returned when sending a PRIVMSG, NOTICE or INVITE to a user with usermode +R set when you are not registered (+r) and you are not an IRC Operator
 example: irc.quakenet.org 486 Dana Dana :You must be authed in order to message this user
 ¶489
 numeric: 489    ERR_VOICENEEDED
 format: <source> 489 <target> <channel> :You're neither voiced nor channel operator
 info: returned when using the CNOTICE or CPRIVMSG command and you are not opped or voiced on the specified channel
 example: irc.quakenet.org 489 Dana #channel :You're neither voiced nor channel operator
 ¶491
 numeric: 491    ERR_NOOPERHOST
 format: <source> 491 <target> :No O-lines for your host
 info: returned when using OPER and there are no matching O lines for your host with the given ID
 example: irc.quakenet.org 491 Dana :No O-lines for your host
 ¶493
 numeric: 493    ERR_NOFEATURE
 format: <source> 493 <target> <feature> :No such feature
 info: returned when using the GET command and such feature does not exist
 example: irc.quakenet.org 493 Dana F :No such feature
 ¶494
 numeric: 494    ERR_BADFEATVALUE
 format: <source> 494 <target> <value> :Bad value for feature <feature>
 info: returned when using the SET command
 example: irc.quakenet.org 494 Dana 1 :Bad value for feature NO_OPER_DEOP_LCHAN
 ¶495
 numeric: 495    ERR_BADLOGTYPE
 format: <source> 495 <target> <log_type> :No such log type
 info: returned when using the SET command, "SET LOG .."
 example: irc.quakenet.org 495 Dana cow :No such log type
 ¶496
 numeric: 496    ERR_BADLOGSYS
 format: <source> 496 <target> <log_system> :No such log subsystem
 info: returned when using the SET command, "SET LOG .."
 example: irc.quakenet.org 496 Dana cow :No such log subsystem
 ¶497
 numeric: 497    ERR_BADLOGVALUE
 format: <source> 497 <target> <log_type> :Bad value for log type
 info: returned when using the SET command, "SET LOG .."
 example: irc.quakenet.org 497 Dana cow :Bad value for log type
 ¶498
 numeric: 498    ERR_ISOPERLCHAN
 format: <source> 498 <target> <nick> <channel> :Cannot kick or deop an IRC Operator on a local channel
 info: returned when trying to kick or deop an IRC Operator on a local channel (feature NO_OPER_DEOP_LCHAN is TRUE)
 example: irc.quakenet.org 498 Dana Dana &channel :Cannot kick or deop an IRC Operator on a local channel
 ¶501
 numeric: 501    ERR_UMODEUNKNOWNFLAG
 format: <source> 501 <target> <mode> :Unknown MODE flag
 info: returned when setting an invalid usermode
 example: irc.quakenet.org 501 Dana q :Unknown MODE flag
 ¶502
 numeric: 502    ERR_USERSDONTMATCH
 format: <source> 502 <target> :Cant change mode for other users
 info: returned when trying to set a usermode for someone else
 example: irc.quakenet.org 502 Dana :Cant change mode for other users
 ¶511
 numeric: 511    ERR_SILELISTFULL
 format: <source> 511 <target> <mask> :Your silence list is full
 info: returned when trying to add an entry to your silence list when it is full
 example: irc.quakenet.org 511 Dana *!*@evil.host.com :Your silence list is full
 ¶512
 numeric: 512    ERR_NOSUCHGLINE
 format: <source> 512 <target> <mask> :No such gline
 info: returned when using the GLINE command
 example: irc.quakenet.org 512 Dana *!*@evil.host.com :No such gline
 ¶513
 numeric: 513    ERR_BADPING
 format: <source> 513 <target> :To connect, type /QUOTE PONG <string>
 format: <source> 513 <target> :Your client may not be compatible with this server.
 format: <source> 513 <target> :Compatible clients are available at <url>
 info: returned when using PONG command with no/wrong parameter duration the registration part, <url> is defined by the F line, default: "ftp://ftp.undernet.org/pub/irc/clients"
 example: irc.quakenet.org 513 Dana :To connect, type /QUOTE PONG 1273843734
 ¶514
 numeric: 514    ERR_NOSUCHJUPE
 format: <source> 514 <target> <server> :No such jupe
 info: returned when using the JUPE command
 example: irc.quakenet.org 514 Dana hub1.quakenet.org :No such jupe
 ¶515
 numeric: 515    ERR_BADEXPIRE
 format: <source> 515 <target> <time> :Bad expire time
 info: returned when setting a G-line or a JUPE with a bad expire time
 example: irc.quakenet.org 515 Dana 0 :Bad expire time
 ¶516
 numeric: 516    ERR_DONTCHEAT
 format: <source> 516 <target>  :Don't Cheat.
 info: returned when using as oper the special password "OVERRIDE" to join a local channel when this is not required
 example: irc.quakenet.org 516 Dana  :Don't Cheat.
 ¶517
 numeric: 517    ERR_DISABLED
 format: <source> 517 <target> <command> :Command disabled.
 info: returned when using a command which is disabled
 example: irc.quakenet.org 512 Dana GLINE :Command disabled.
 ¶518
 numeric: 518    ERR_LONGMASK
 format: <source> 518 <target> :Mask is too long
 info: returned when using the GLINE command
 example: irc.quakenet.org 518 Dana :Mask is too long
 ¶519
 numeric: 519    ERR_TOOMANYUSERS
 format: <source> 519 <target> <count> :Too many users affected by mask
 info: returned when trying to set a gline which matches more than X users (where X is defined in feature GLINEMAXUSERCOUNT)
 example: irc.quakenet.org 519 Dana 100 :Too many users affected by mask
 ¶520
 numeric: 520    ERR_MASKTOOWIDE
 format: <source> 520 <target> <mask> :Mask is too wide
 info: returned when using the GLINE command
 example: irc.quakenet.org 520 Dana *!*Dana*@* :Mask is too wide
 ¶524
 numeric: 524    ERR_QUARANTINED
 format: <source> 524 <target> <channel> :<reason>
 info: returned when using OPMODE or CLEARMODE on a Q-lined channel
 example: irc.quakenet.org 524 Dana #channel :They can take care of themselves
 ¶530
 numeric: 530    ERR_BADHOSTMASK
 format: <source> 530 <target> <mask> :Invalid username/hostmask
 info: returned when using the SETHOST command
 example: irc.quakenet.org 530 Dana Dana@=Dana :Invalid username/hostmask
 ¶531
 numeric: 531    ERR_HOSTUNAVAIL
 format: <source> 531 <target> <mask> :sethost not found
 info: returned when using the SETHOST command
 example: irc.quakenet.org 531 Dana cows.go.moo :sethost not found
 ¶admin
 ADMIN command: 256 RPL_ADMINME   257 RPL_ADMINLOC1    258 RPL_ADMINLOC2     259 RPL_ADMINEMAIL   402 ERR_NOSUCHSERVER   423 ERR_NOADMININFO   481 ERR_NOPRIVILEGES
 ¶away
 AWAY command: 301 RPL_AWAY   305 RPL_UNAWAY   306 RPL_NOWAWAY
 ¶check
 CHECK command: 286 RPL_CHKHEAD   287 RPL_CHANUSER   290 RPL_DATASTR   291 RPL_ENDOFCHECK   408 ERR_SEARCHNOMATCH   461 ERR_NEEDMOREPARAMS   481 ERR_NOPRIVILEGES
 ¶clearmode
 CLEARMODE command: 403 ERR_NOSUCHCHANNEL   461 ERR_NEEDMOREPARAMS   481 ERR_NOPRIVILEGES   517 ERR_DISABLED   524 ERR_QUARANTINED
 ¶close
 CLOSE command: 362 RPL_CLOSING   363 RPL_CLOSEEND   481 ERR_NOPRIVILEGES
 ¶cnotice
 CNOTICE command: 301 RPL_AWAY   401 ERR_NOSUCHNICK   403 ERR_NOSUCHCHANNEL   441 ERR_USERNOTINCHANNEL   442 ERR_NOTONCHANNEL   461 ERR_NEEDMOREPARAMS   489 ERR_VOICENEEDED
 ¶connect
 CONNECT command: 402 ERR_NOSUCHSERVER   461 ERR_NEEDMOREPARAMS   481 ERR_NOPRIVILEGES
 ¶cprivmsg
 CPRIVMSG command: 301 RPL_AWAY   401 ERR_NOSUCHNICK   403 ERR_NOSUCHCHANNEL   441 ERR_USERNOTINCHANNEL   442 ERR_NOTONCHANNEL   461 ERR_NEEDMOREPARAMS   489 ERR_VOICENEEDED
 ¶get
 GET command: 284 RPL_FEATURE   461 ERR_NEEDMOREPARAMS   481 ERR_NOPRIVILEGES   493 ERR_NOFEATURE
 ¶gline
 GLINE command:247 RPL_STATSGLINE   280 RPL_GLIST   281 RPL_ENDOFGLIST   402 ERR_NOSUCHSERVER   461 ERR_NEEDMOREPARAMS   465 ERR_YOUREBANNEDCREEP   481 ERR_NOPRIVILEGES   512 ERR_NOSUCHGLINE   518 ERR_LONGMASK   515 ERR_BADEXPIRE   517 ERR_DISABLED   519 ERR_TOOMANYUSERS   520 ERR_MASKTOOWIDE
 ¶info
 INFO command: 371 RPL_INFO   374 RPL_ENDOFINFO   402 ERR_NOSUCHSERVER   481 ERR_NOPRIVILEGES
 ¶invite
 INVITE command: 301 RPL_AWAY   341 RPL_INVITING   346 RPL_INVITELIST   347 RPL_ENDOFINVITELIST   401 ERR_NOSUCHNICK   442 ERR_NOTONCHANNEL   443 ERR_USERONCHANNEL   461 ERR_NEEDMOREPARAMS   482 ERR_CHANOPRIVSNEEDED   486 ERR_ACCOUNTONLY
 ¶ison
 ISON command: 303 RPL_ISON   461 ERR_NEEDMOREPARAMS
 ¶join
 JOIN command: 332 RPL_TOPIC   333 RPL_TOPICWHOTIME   353 RPL_NAMREPLY   366 RPL_ENDOFNAMES   403 ERR_NOSUCHCHANNEL   405 ERR_TOOMANYCHANNELS   461 ERR_NEEDMOREPARAMS   471 ERR_CHANNELISFULL   473 ERR_INVITEONLYCHAN   474 ERR_BANNEDFROMCHAN   475 ERR_BADCHANNELKEY   477 ERR_NEEDREGGEDNICK   479 ERR_BADCHANNAME   516 ERR_DONTCHEAT
 ¶jupe
 JUPE command: 282 RPL_JUPELIST   283 RPL_ENDOFJUPELIST   402 ERR_NOSUCHSERVER   461 ERR_NEEDMOREPARAMS   481 ERR_NOPRIVILEGES   514 ERR_NOSUCHJUPE   515 ERR_BADEXPIRE   517 ERR_DISABLED
 ¶kick
 KICK command: 403 ERR_NOSUCHCHANNEL   441 ERR_USERNOTINCHANNEL   461 ERR_NEEDMOREPARAMS   482 ERR_CHANOPRIVSNEEDED   484 ERR_ISCHANSERVICE   485 ERR_ISREALSERVICE   498 ERR_ISOPERLCHAN
 ¶kill
 KILL command: 401 ERR_NOSUCHNICK   461 ERR_NEEDMOREPARAMS   481 ERR_NOPRIVILEGES   483 ERR_CANTKILLSERVER   484 ERR_ISCHANSERVICE   485 ERR_ISREALSERVICE
 ¶links
 LINKS command: 364 RPL_LINKS 365 RPL_ENDOFLINKS
 ¶list
 LIST command: 321 RPL_LISTSTART   322 RPL_LIST   323 RPL_LISTEND   334 RPL_LISTUSAGE
 ¶lusers
 LUSERS command: 251 RPL_LUSERCLIENT   252 RPL_LUSEROP   253 RPL_LUSERUNKNOWN   254 RPL_LUSERCHANNELS   255 RPL_LUSERME
 ¶map
 MAP command: 015 RPL_MAP   016 RPL_MAPMORE   017 RPL_MAPEND
 ¶mode
 MODE command: 008 RPL_SNOMASK   221 RPL_UMODEIS   324 RPL_CHANNELMODEIS   329 RPL_CREATIONTIME   367 RPL_BANLIST   368 RPL_ENDOFBANLIST   396 RPL_HOSTHIDDEN   401 ERR_NOSUCHNICK   403 ERR_NOSUCHCHANNEL   441 ERR_USERNOTINCHANNEL   442 ERR_NOTONCHANNEL   461 ERR_NEEDMOREPARAMS
 MODE command: 467 ERR_KEYSET   472 ERR_UNKNOWNMODE   478 ERR_BANLISTFULL   482 ERR_CHANOPRIVSNEEDED   484 ERR_ISCHANSERVICE   485 ERR_ISREALSERVICE   498 ERR_ISOPERLCHAN   501 ERR_UMODEUNKNOWNFLAG   502 ERR_USERSDONTMATCH   530 ERR_BADHOSTMASK   531 ERR_HOSTUNAVAIL
 ¶motd
 MOTD command: 372 RPL_MOTD   375 RPL_MOTDSTART   376 RPL_ENDOFMOTD   382 RPL_REHASHING   422 ERR_NOMOTD   481 ERR_NOPRIVILEGES
 ¶names
 NAMES command: 353 RPL_NAMREPLY   355 RPL_DELNAMREPLY   366 RPL_ENDOFNAMES   402 ERR_NOSUCHSERVER   403 ERR_NOSUCHCHANNEL   481 ERR_NOPRIVILEGES
 ¶nick
 NICK command: 431 ERR_NONICKNAMEGIVEN   432 ERR_ERRONEUSNICKNAME   433 ERR_NICKNAMEINUSE   436 ERR_NICKCOLLISION   437 ERR_BANNICKCHANGE   438 ERR_NICKTOOFAST   461 ERR_NEEDMOREPARAMS
 ¶notice
 NOTICE command: 404 ERR_CANNOTSENDTOCHAN   411 ERR_NORECIPIENT   412 ERR_NOTEXTTOSEND   413 ERR_NOTOPLEVEL   414 ERR_WILDTOPLEVEL   439 ERR_TARGETTOOFAST   486 ERR_ACCOUNTONLY
 ¶oper
 OPER command: 381 RPL_YOUREOPER   461 ERR_NEEDMOREPARAMS   464 ERR_PASSWDMISMATCH   491 ERR_NOOPERHOST
 ¶opmode
 OPMODE command: 401 ERR_NOSUCHNICK   403 ERR_NOSUCHCHANNEL   441 ERR_USERNOTINCHANNEL   461 ERR_NEEDMOREPARAMS   481 ERR_NOPRIVILEGES   517 ERR_DISABLED   524 ERR_QUARANTINED
 ¶part
 PART command: 403 ERR_NOSUCHCHANNEL   442 ERR_NOTONCHANNEL   461 ERR_NEEDMOREPARAMS
 ¶ping
 PING command: 409 ERR_NOORIGIN   402 ERR_NOSUCHSERVER
 ¶pong
 PONG command: 409 ERR_NOORIGIN   513 ERR_BADPING
 ¶privmsg
 PRIVMSG command: 301 RPL_AWAY   401 ERR_NOSUCHNICK   402 ERR_NOSUCHSERVER   403 ERR_NOSUCHCHANNEL   404 ERR_CANNOTSENDTOCHAN   411 ERR_NORECIPIENT   412 ERR_NOTEXTTOSEND   413 ERR_NOTOPLEVEL   414 ERR_WILDTOPLEVEL   439 ERR_TARGETTOOFAST   486 ERR_ACCOUNTONLY
 ¶privs
 PRIVS command: 270 RPL_PRIVS   481 ERR_NOPRIVILEGES
 ¶rehash
 REHASH command: 382 RPL_REHASHING   481 ERR_NOPRIVILEGES
 ¶rping
 RPING command: 402 ERR_NOSUCHSERVER   461 ERR_NEEDMOREPARAMS   481 ERR_NOPRIVILEGES
 ¶set
 SET command: 461 ERR_NEEDMOREPARAMS   481 ERR_NOPRIVILEGES   494 ERR_BADFEATVALUE   495 ERR_BADLOGTYPE   496 ERR_BADLOGSYS   497 ERR_BADLOGVALUE
 ¶sethost
 SETHOST command: 396 RPL_HOSTHIDDEN   461 ERR_NEEDMOREPARAMS   517 ERR_DISABLED   530 ERR_BADHOSTMASK   531 ERR_HOSTUNAVAIL
 ¶silence
 SILENCE command: 271 RPL_SILELIST   272 RPL_ENDOFSILELIST   401 ERR_NOSUCHNICK   511 ERR_SILELISTFULL
 ¶stats
 STATS command: 211 RPL_STATSLINKINFO   212 RPL_STATSCOMMANDS   213 RPL_STATSCLINE   215 RPL_STATSILINE   216 RPL_STATSKLINE   217 RPL_STATSPLINE   218 RPL_STATSYLINE   219 RPL_ENDOFSTATS   228 RPL_STATSQLINE   236 RPL_STATSVERBOSE   237 RPL_STATSENGINE   238 RPL_STATSFLINE
 STATS command: 241 RPL_STATSLLINE   242 RPL_STATSUPTIME   243 RPL_STATSOLINE   244 RPL_STATSHLINE   246 RPL_STATSTLINE   247 RPL_STATSGLINE   248 RPL_STATSULINE   249 RPL_STATSDEBUG   250 RPL_STATSCONN   275 RPL_STATSDLINE   304 RPL_TEXT    398 RPL_STATSSLINE   481 ERR_NOPRIVILEGES
 ¶squit
 SQUIT command: 461 ERR_NEEDMOREPARAMS   481 ERR_NOPRIVILEGES
 ¶time
 TIME command: 391 RPL_TIME
 ¶topic
 TOPIC command: 331 RPL_NOTOPIC   332 RPL_TOPIC   333 RPL_TOPICWHOTIME   403 ERR_NOSUCHCHANNEL   442 ERR_NOTONCHANNEL   482 ERR_CHANOPRIVSNEEDED
 ¶trace
 TRACE command: 200 RPL_TRACELINK   201 RPL_TRACECONNECTING   202 RPL_TRACEHANDSHAKE   203 RPL_TRACEUNKNOWN   204 RPL_TRACEOPERATOR   205 RPL_TRACEUSER   206 RPL_TRACESERVER   208 RPL_TRACENEWTYPE   209 RPL_TRACECLASS   481 ERR_NOPRIVILEGES
 ¶uping
 UPING command: 461 ERR_NEEDMOREPARAMS   481 ERR_NOPRIVILEGES
 ¶userhost
 USERHOST command: 302 RPL_USERHOST   461 ERR_NEEDMOREPARAMS
 ¶userip
 USERIP command: 340 RPL_USERIP   461 ERR_NEEDMOREPARAMS
 ¶version
 VERSION command: 005 RPL_ISUPPORT   351 RPL_VERSION   402 ERR_NOSUCHSERVER   481 ERR_NOPRIVILEGES
 ¶wallchops
 WALLCHOPS commmand: 403 ERR_NOSUCHCHANNEL   404 ERR_CANNOTSENDTOCHAN   411 ERR_NORECIPIENT   412 ERR_NOTEXTTOSEND
 ¶wallops
 WALLOPS command: 461 ERR_NEEDMOREPARAMS   481 ERR_NOPRIVILEGES
 ¶wallusers
 WALLUSERS command: 461 ERR_NEEDMOREPARAMS   481 ERR_NOPRIVILEGES
 ¶wallvoices
 WALLVOICES command: 403 ERR_NOSUCHCHANNEL   404 ERR_CANNOTSENDTOCHAN   411 ERR_NORECIPIENT   412 ERR_NOTEXTTOSEND
 ¶who
 WHO command: 315 RPL_ENDOFWHO   352 RPL_WHOREPLY   354 RPL_WHOSPCRPL   416 ERR_QUERYTOOLONG
 ¶whois
 WHOIS command: 301 RPL_AWAY   311 RPL_WHOISUSER   312 RPL_WHOISSERVER   313 RPL_WHOISOPERATOR   317 RPL_WHOISIDLE   318 RPL_ENDOFWHOIS   319 RPL_WHOISCHANNELS   330 RPL_WHOISACCOUNT   338 RPL_WHOISACTUALLY   401 ERR_NOSUCHNICK   402 ERR_NOSUCHSERVER   416 ERR_QUERYTOOLONG   431 ERR_NONICKNAMEGIVEN
 ¶whowas
 WHOWAS command: 301 RPL_AWAY   312 RPL_WHOISSERVER   314 RPL_WHOWASUSER   369 RPL_ENDOFWHOWAS   406 ERR_WASNOSUCHNICK   431 ERR_NONICKNAMEGIVEN
 ¶009
 numeric: 009    RPL_STATMEMTOT
 format: <source> 009 <target> %u %u :Bytes Blocks
 info: nolonger used in ircu+asuka or not used but reserved by rfc2812
 ¶010
 numeric: 010    RPL_STATMEM
 format: <source> 010 <target> %u %u %s [%u]
 info: nolonger used in ircu+asuka or not used but reserved by rfc2812
 ¶214
 numeric: 214    RPL_STATSNLINE
 format: <source> 214 <target> N <ip|host> * <server> <port> <class>
 info: nolonger used in ircu+asuka or not used but reserved by rfc2812
 ¶231
 numeric: 231    RPL_SERVICEINFO
 format: <source> 231 <target> 0
 info: nolonger used in ircu+asuka or not used but reserved by rfc2812
 ¶232
 numeric: 232    RPL_ENDOFSERVICES
 format: <source> 232 <target> 0
 info: nolonger used in ircu+asuka or not used but reserved by rfc2812
 ¶233
 numeric: 233    RPL_SERVICE
 format: <source> 233 <target> 0
 info: nolonger used in ircu+asuka or not used but reserved by rfc2812
 ¶234
 numeric: 234    RPL_SERVLIST
 format: <source> 234 <target> 0
 info: nolonger used in ircu+asuka or not used but reserved by rfc2812
 ¶235
 numeric: 235    RPL_SERVLISTEND
 format: <source> 235 <target> 0
 info: nolonger used in ircu+asuka or not used but reserved by rfc2812
 ¶261
 numeric: 261    RPL_TRACELOG
 format: <source> 261 <target> File %s %d
 info: nolonger used in ircu+asuka or not used but reserved by rfc2812
 ¶262
 numeric: 262    RPL_TRACEPING
 format: <source> 262 <target> Ping %s %s
 info: nolonger used in ircu+asuka or not used but reserved by rfc2812
 ¶285
 numeric: 285    RPL_NEWHOSTIS
 format: <source> 285 <target> %s: %s host %s - [%s@%s]
 info: nolonger used in ircu+asuka or not used but reserved by rfc2812
 ¶300
 numeric: 300    RPL_NONE
 format: <source> 300 <target> 0
 info: nolonger used in ircu+asuka or not used but reserved by rfc2812
 ¶373
 numeric: 373    RPL_INFOSTART
 format: <source> 373 <target> :Server INFO
 info: nolonger used in ircu+asuka or not used but reserved by rfc2812
 ¶407
 numeric: 407    ERR_TOOMANYTARGETS
 format: <source> 407 <target> <mask> :Duplicate recipients. No message delivered
 info: nolonger used in ircu+asuka or not used but reserved by rfc2812
 ¶463
 numeric: 463    ERR_NOPERMFORHOST
 format: <source> 463 <target> :Your host isn't among the privileged
 info: nolonger used in ircu+asuka or not used but reserved by rfc2812
 ¶466
 numeric: 466    ERR_YOUWILLBEBANNED
 format: <source> 466 <target> 0
 info: nolonger used in ircu+asuka or not used but reserved by rfc2812
 ¶476
 numeric: 476    ERR_BADCHANMASK
 format: <source> 476 <target> %s :Bad Channel Mask
 info: nolonger used in ircu+asuka or not used but reserved by rfc2812
 ¶error event
 event: ERROR
 format: ERROR :Closing Link: <nick> by <source> (<reason>)
 info: shows you are being disconnected from the server, reason can be excess flood, killed, etc.
 example: ERROR :closing link: Dana by irc.quakenet.org (excess flood)
 ¶invite event
 event: INVITE
 format: <source> INVITE :<channel> <timestamp>
 info: shows you are being invited to channel, timestamp is the channel's creation time
 example: Dana!Dana@Dana.users.quakenet.org INVITE :#channel 1097838164
 ¶join event
 event: JOIN
 format: <source> JOIN <channel>
 info: shows a user joining a channel.
 example: Dana!Dana@Dana.users.quakenet.org JOIN #channel
 ¶kick event
 event: KICK
 format: <source> KICK <channel> <target> :<message>
 info: shows a user being kicked from a channel
 example: Dana!Dana@Dana.users.quakenet.org KICK #channel fiDanaot :fish go out!
 ¶kill event
 event: KILL
 format: <source> KILL <your_nick> :<killed_by> (<reason>)
 info: happens when you get killed
 example: irc.quakenet.org KILL Dana :*.quakenet.org (spam)
 ¶mode event
 event: MODE
 format: <source> MODE <your_nick|channel> <[+|-]><modes> [<params>]
 info: shows modes changes
 example: Dana!Dana@Dana.users.quakenet.org MODE #channel +l 10
 example: Dana!Dana@Dana.users.quakenet.org MODE Dana +x
 ¶nick event
 event: NICK
 format: <source> NICK :<new_nick>
 info: shows a user changing nick
 example: Dana!Dana@Dana.users.quakenet.org NICK :Dana-
 ¶notice event
 event: NOTICE
 format: <source> NOTICE <target> :[@|+] <message>
 info: shows when a notice is received, target can be you or a channel you are in, target can also be a $(mask) making it a broadcast
 example: Q!TheQBot@CServe.quakenet.org NOTICE Dana :Unknown command. Type   "/msg Q showcommands"
 ¶part event
 event: PART
 format: <source> PART <channel> [:<message>]
 info: shows when a user parts a channel
 example: Dana!Dana@Dana.users.quakenet.org PART #channel
 ¶ping event
 event: PING
 format: <source> PING :<string>
 info: the server checks if the connection is still alive. if the client fails to respond with PONG with the given string, the client will be disconnected
 example: irc.quakenet.org PING :1107704864
 ¶pong event
 event: PONG
 format: <source> PONG :<string>
 info: shows the result of a PING command
 example: irc.quakenet.org PONG :ALIVE
 ¶privmsg event
 event: PRIVMSG
 format: <source> PRIVMSG <target> :<message>
 info: shows when a message is received, target can be you or a channel you are in, target can also be a $(mask) making it a broadcast
 example: Dana!Dana@Dana.users.quakenet.org PRIVMSG #channel :hi there
 ¶quit event
 event: QUIT
 format: <source> QUIT [:<message>]
 info: shows when a user quits IRC
 example: Dana!Dana@Dana.users.quakenet.org QUIT :Signed off
 ¶rpong event
 event: RPONG
 format: <source> RPING <your_nick> <server> <delay_in_ms> :<string>
 info: shows the result of a RPING command
 example: irc.quakenet.org RPING Dana hub1.quakenet.org 1 :<No client start time>
 ¶silence event
 event: SILENCE
 format: <source> SILENCE [+|-]<mask>
 info: shows added/removing a mask from your silence list.
 example: Dana!Dana@Dana.users.quakenet.org SILENCE +*!*@12.34.56.78
 ¶topic event
 event: TOPIC
 format: <source> TOPIC <channel> :[<topic>]
 info: shows when the topic is changed
 example: Dana!Dana@Dana.users.quakenet.org TOPIC #channel :welcome to #channel
 ¶wallops event
 event: WALLOPS
 format: <source> WALLOPS :[*|$] <message>
 info: shows when a WALLOPS or WALLUSERS message is received. the * shows it is a WALLOPS message, the $ shows it is a WALLUSERS message, none means it is a WALLDESYNCH message.
 example: Dana!Dana@Dana.users.quakenet.org :$ moooo!