Scon
From Scriptwiki
Revision as of 21:23, 16 December 2005 by Doomie (talk | contribs) (need to go away, continue later on)
Changes the active connection for a script to connection id N, where N is the Nth connection.
/scon <-rsatM | N> [command]
Note that all commands after the /scon command will be performed on the new connection id.
Explanation of the switches (-a and -tM can only be used if you specify a command):
| Switch | Meaning |
| r | resets the connection id to the original id for that script. |
| a | performs the command on all connection ids. |
| tM | limits the command to being performed only on servers with a certain connection status, where M is an or'd value of 1 = server connected, 2 = not connected, 4 = connecting, 8 = not connecting.The command is only performed if M matches the connect status of the connection id. |
| s | makes any called commands or identifiers show their results. |
Note that if you use a command that contains $identifiers, and you want the identifiers to be evaluated in the target connection, you must pass them as $!identifier to prevent them from being evaluated first in the current connection.
