View source for Ruser

This removes user from the user list. 
 /ruser [levels] <nick | address> [type]


If you specify levels then these levels are removed from the current access levels of this user. If all levels a user user has have been removed, the user will be removed too. If you specify a type then the users address is looked up with a [[Userhost|/userhost]] and any users in the users list matching this address are removed.

If you put an exclamation mark after the nick (e.g. /ruser foobar!), it removes all users with an address beginning with ''foobar!''.

== Example ==
 ruser Dana
This would remove Dana from your user list.


 ruser Dana 2
This would remove all users matching *!*@staff.quakenet.org as type 2 of Dana's address (Dana!dana@staff.quakenet.org) is *!*@staff.quakenet.

== See Also ==
To add a user by his address, use [[Guser|/guser]].

If you want to remove all users from the remote users list with a specified general access level, look at [[Rlevel|/rlevel]].

To use these levels, take a look at the [[$level]] identifier.

To use the information you have stored, use the [[$ulist]] identifier.

[[$mask]] gives you a view over all address types.

[[Category:Userlist]]